Smooth-On XTC-3D High-Performance 3D Print Coating

Smooth-On XTC-3D High-Performance 3D Print Coating cures to a hard, impact-resistant, high-gloss finish that can be sanded, primed, and painted. Adding colors and metal effects is easy, too.
XTC3D is a protective coating for smoothing and finishing 3D printed parts It can be applied to both SLA and SLS prints and it works with PLA ABS Laywoo filament powder printed parts and other rigid media It can be used to coat EPS EPDM and urethane foam as well as wood plaster fabric cardboard and paper This coating selflevels wets out uniformly without leaving brushstrokes and fills in 3D print striations (eliminating almost all postfinishing work) SmoothOn XTC3D HighPerformance 3D Print Coating cures to a hard impactresistant highgloss finish that can be sanded primed and painted Adding colors and metal effects is easy too Working time is 10 minutes and cure time is approximately four hours (depending upon mass and temperature) 1 oz covers more than 100 square inches The kit includes a foam brush mixing stick mixing cup Part A (448 oz) Part B (192 oz) and instructions XTC3D contains no VOCs phthalates or phosphates

XTC-3D High Performance 3D Print Coating - 24 oz

XTC-3D - the printout smoothing material review - 3DPC

XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating

XTC-3D Smooth On High Performance 3D Print Coating 644g/24oz

Hack: Smooth-On XTC-3d coating makes T-Glase transparent! - Coffee

XTC-3D - High Performance 3D Print Coating - 24 Ounce Unit

XTC-3D - High Performance 3D Print Coating - 6.4 Ounce Unit

Smooth-On XTC-3D - 3DNet

XTC-3D™, High Performance 3D Print Coating

XTC-3D™ High Performance 3D Print Coating

XTC-3D™ High Performance 3D Print Coating

XTC-3D High Performance 3D Print Coating - 24oz. Unit : .co

XTC-3D™ High Performance 3D Print Coating

Smoothing the Surface of a 3D Printed Model Using XTC-3D® Coating

How To: Easily Smooth and Finish 3D Prints with XTC-3D

XTC 3D Print Coating Epoxy Kit – ResinCraft